Owner's Manual

Page 6
Safety
Precautions
Operation of Current Device
RESET
TEST
Plug in & press
RESET
The power supply cord contains a current
measuring device that detects damage to
the power cord. Test your power supply
cord as follows:
1. Plug in the air conditioner.
2. The power supply cord will have TWO
buttons on the plug head. Press the
TEST button. You will notice a click as
the RESET button pops out.
3. Press the RESET Button. You will notice
a click as the button engages.
4. The power supply cord is now supplying
electricity to the unit. (On some
products this is also indicated by a light
on the plug head.)
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
Grounding type wall receptacle
Power supply cord with 3-prong grounding
plug and current detection device.
NOTICE
The power supply cord with this air
conditioner contains a current detection
device designed to reduce the risk of
fire.
In the event that the power supply cord
is damaged, it can not be repaired. It
must be replaced with a cord from the
manufacturer.
NOTICE
• Do not use this device to turn the unit on or off.
• Always make sure the RESET button is pushed in for correct operation.
• The power supply cord must be replaced if it fails to reset when either the TEST
button is pushed, or it can not be reset. Please contact Customer Service.