Instructions / Assembly

 Page 20 

Remote Control Operating

Instructions

Using The Remote Control

Location of the remote controller

Use the remote controller within a distance of 8 meters

/ 26 feet from the appliance, pointing it towards the

receiver. Reception is confirmed by a beep.

Electronic display displays the following information:

A: Remote control power On/OFF and mode icons

B: Clock and Auto-Timer settings

C: Current set temperature

D: Fan speed setting control buttons

1. Power switch

CAUTION

• The air conditioner will not operate if courtains,

doors or other materials block the signals from the

remote controller to the indoor unit.

• Prevent any liquid from falling into the remote

controller. Do not expose the remote controller to

direct sunlight or heat.

• If the infrared signal receiver on the indoor unit is

exposed to direct sunlight, the air conditioner may

not function properly. Use curtains to prevent the

sunlight for falling on the receiver.

• If other eletrical appliances react to the remote

controller, either move these appliances or call

customer support.

NOTE

The unit will automatically launch the Energy Saver

function when it is in Cool, Dry and Auto modes.

2. Mode

3. Fan speed

4. Energy Saver - default setting which allows the fan

to cycle on and off (instead of running continuously)

when the compressor is not in use

5. Auto-Timer

Operating

Instructions

(With Remote)

Electronic

Display