User Manual

15
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
4. In order to remove the plug, you
need to squeeze the two ends
and pull the plug out, or need to
use the tools such as a flat screw
driver or needle nose plier.
Plug
5. Carefully Remove the plugs /
label from inside the freezer
compartment using a putty knife.
Label
6. Peel away the label covering the
ice-maker installation hole.
Remove
Label
7. Using a pair of needle nose pliers,
remove the foam from the hole.
Remove and
Discard Foam
8. Insert the water inlet tube into
the small hole on the back of
the refrigerator. Rotate the hose
while inserting until the flat
surface of the hose is secure
against the back of the
refrigerator.