Use and Care Guide

17
Refrigerator
Safety
Operating
Requirements
Parts and
Features
Installation
Refrigerator
Use
Refrigerator
Care
Troubleshooting
Before
Use
14. Mount the ice maker assembly on to
the two (2) screws installed in
step # 11.
Tighten the screws.
Be sure that the water inlet tube is
securely inside the fill cup.
Screw(5)
Fill Tube
15. Adjust the leveling bracket to ensure
the ice maker assembly is totally level.
The ice maker will be level when the
gap between the freezer wall and the
ice maker assembly is the same at the
top and bottom.
Once completely level, tighten the
leveling bracket screw.
(1) Ice Maker
(6)Screw
(7)Bracket
Top
Bottom
16. Reinstall the freezer shelf below the
ice maker assembly.
Set the ice container below the ice
maker assembly.
(2) Ice
Container
17. Connect the wiring harness to the
water valve as shown.
Ensure the connection is secure.
(10) Water valve
18. Install the mounting box on the
connecting terminal of the water
valve and the wiring harness. After
the cover is closed, fix the box cover
and the mounting box firmly with
screws.
(12) Box cover
(13) Mounting box