Use and Care Guide
INSTALL WATER FILTER
REMOVE BYPASS PLUG
2.
1. 
 Turn o the water supply to refrigerator.
Squeeze the sides of the filter cover where marked, and then pull
downward to open the cover.
Filter cover
3. Turn the bypass plug counterclockwise, and then pull out to remove.
IMPORTANT: Keep the bypass plug for later use. The ice maker and
dispenser will not operate unless either a water filter or the bypass
plug is properly installed.
Bypass plug
Refrigerator 
Safety
Operating 
Requirements
Parts and 
Features
Installation
Refrigerator 
Use
Refrigerator
Care
Troubleshooting
Before 
Use










