4.5 Cu. Ft. Top Load Washer Spec Sheet

CLEAN TECHNOLOGY

FOR CLEANER LAUNDRY

4.5 Cu. Ft. Top Load Washer MLV45N1BWW

midea.com

The Midea Top Load Washer features a large, 4.5 Cu. Ft. capacity and 10 pre-set cycles

including extra rinse and soak options, a stainless-steel tub and a look-through lid.

Two-Stage Dispenser

Normal detergent amount is released in 2 stages to

boost cleaning power and reduce odor.

Stainless Steel Tub

Durable stainless steel tub is built to last.

Electronic Controls

Sleek, modern electronic controls provide cycle status

at a glance.

10 Pre-set Cycles

A variety of pre-sets lets you match the cycle to the

garments you’re washing: Normal, Delicate, Heavy

Duty, Active Wear, Whites, Rinse and Spin, Bulky

Items, Tub Clean, Quick Wash, and Spin Only.

Soft Close Glass Lid

Lets you view your wash without interrupting the cycle.

Slam-proof hinge delivers smooth, soft lid closing.

Water Plus

Maximizes the water level used during the wash

cycle to ensure all items are thoroughly soaked.

PAGE 1
CLEAN TECHNOLOGY FOR CLEANER LAUNDRY 4.5 Cu. Ft. Top Load Washer MLV45N1BWW The Midea Top Load Washer features a large, 4.5 Cu. Ft. capacity and 10 pre-set cycles including extra rinse and soak options, a stainless-steel tub and a look-through lid. Two-Stage Dispenser Stainless Steel Tub Normal detergent amount is released in 2 stages to boost cleaning power and reduce odor. Durable stainless steel tub is built to last.
PAGE 2
4.5 Cu. Ft Top Load Washer Model MLV45N1BWW SPECIFICATIONS Models MLV45N1BWW UPC 8-10004818897 PERFORMANCE DOE Yes ENERGY STAR® - IMEF (cu. ft./kWh/cycle) 1.57 IWF (gallons/cycle/cu. ft.) 6.5 Max Spin Speed (RPM) 700 Vibration Reduction Friction suspension UL Certification Yes FEATURES Capacity (cu. ft.) 4.5 No. of Cycles 10 (Normal, Delicate, Heavy Duty, Active Wear, Whites, Rinse & Spin, Bulky Items, Tub Clean, Quick Wash, Spin Only) No.
PAGE 3
4.5 Cu. Ft Top Load Washer & 7.5 Cu. Ft. Dryer Models MLV45N1BWW, MLE45N1BWW, MLG45N1BWW Alcove or Closet or Wall Insert/Recessed Installations Minimum clearances between the unit and adjacent walls or other surfaces: Sides (in / cm) 1 / 2.5 Rear (in / cm) 6 / 15.2 Top (in / cm) 24 / 61 Closet Front (in / cm) 2 / 5.1 Gap between the end of water valve and the wall (in / cm) Case 1: If you connect the supply hose after you install your washer: Over 3.9 in.