8.0 Front Load Dryer Spec Sheet

Front Load Dryer
Models MLE52S7AGS, MLE52S7AWW, MLG52S7AGS, MLG52S7AWW
midea.com
Alcove or Closet or Wall Insert/Recessed Installations
10
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
ALCOVE OR CLOSET OR WALL INSERT/RECESSED
INSTALLATIONS
WARNING
The dryer must be exhausted to the outside to reduce the risk of fire
when installed any place inside the house.
No other fuel-burning appliance should be installed in the same
closet as the dryer.
Minimum clearances between the dryer and adjacent walls or other
surfaces:
Sides 1 in. (25 mm) Rear 5 in. (127 mm)
To p 24 in. (610 mm) Closet front 2 in. (51 mm)
A
A
A
B B
C
E
D F
A 1 in. (25 mm) C 24 in. (610 mm) E 33.7 in. (855 mm)
B 27 in. (686 mm) D 2 in. (51 mm) F 5 in. (127 mm)
Minimum clearances between the dryer and adjacent walls or other surfaces:
WARNING
The dryer must be exhausted to the outside to reduce risk of fire when installed any place
inside the house.
No other fuel-burning appliance should be installed in the same closet as the dryer.
Sides (in / mm) 1 / 25 Rear (in / mm) 5 / 127
Top (in / mm) 24 / 610 Closet Front (in / mm) 2 / 51
A (in / mm)
1 / 25
C (in / mm)
24 / 610
E (in / mm)
33.7 / 855
B (in / mm)
27 / 686
D (in / mm)
2 / 51
F (in / mm)
5 / 127