Midea Cooker Hood Instructions MODEL: MHT60BL MHT90BL SAVE THESE INSTRUCTIONS CAREFULLY Read the instructions carefully before using your cooker hood, and keep them carefully. If you follow the instructions, your cooker hood will serve you many years well.
RECOMMENDATIONS AND SUGGESTIONS The instructions apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your appliance. INSTALLATION ●● The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. ●● The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the cooker hood.
COMPONENTS Ref. Qty. Product Components 1 1 Hood Body, complete with Control, Light, Blower, Filter. 2.1 1 Lower Decorative Chimney 2.2 1 Upper Decorative Chimney 4 1 Exhaust Pipe 5 2 Activated Charcoal Filter (optional) Qty. Documentation 1 Instruction Manual Ref. Qty.
DIMENSION 1 4 Chimney 400+400 A 448 B 485-838
INSTALLATION WALL DRILLING AND BRACKET FIXING Option 1 Chimney 400X400 X 155-500 As the first step, proceed with the following drawings: ●● A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be fitted. ●● A horizontal line A at 970 – 1070 mm above the cooker top. ●● A horizontal line B at X mm above the horizontal line A. ●● A horizontal line C at 288 mm below the horizontal line A.
Hook the hood body ●● Hook the hood body to the bracket 20. ●● Level the hood body itself. ●● Lock screws (M5*12) into the hood fixing bracket to prevent the hood body from accidentally sliding off. Remove the filter from the inside of the hood body, and fix the screw 10 to wall plug 11 at the point (3) (optional).
USE Speed Adjustment After the hood is switched on, a beep sound will be heard and all key lights be lit up for 1 s, indicating the hood has been powered on: ●● ●● ●● ●● Power Key: Control the motor power.
MAINTENANC GREASE FILTER METAL SELF-SUPPORTING GREASE FILTER CLEANING ●● The filters must be cleaned every 2 months of operation or more frequently for particularly heavy usage, and can be washed in a dishwasher. ●● Remove the filters one by one by pushing them towards the back side of the hood unit and simultaneously pulling downwards. ●● Any kind of bending of the filters has to be avoided when washing them. Before fitting them again into the hood, make sure that they are completely dry.
Dismantling LED light module ●● Remove the grease filter, and carefully remove 2 screws from the front plate (a cross headed screwdriver will be needed to remove the screws). ●● Disconnect the terminal of LED light. ●● Press LED light at the back of the front plate, and take the LED light out. ●● Replace the light (commercially available LED light (max. 1.5 w). Round/ Diameter: 70 mm Max Power Voltage 1.5 W DC 12 V Picture Light Cap ILCOS D Code —— DSR-1.
TROUBLE SHOOTING Fault Cause Solution The blade is blocked. Light is on, but motor does not work The capacitor is damaged. Replace the capacitor. The motor is damaged. Replace the motor. The internal wiring of motor is cut off/ disconnected. An unpleasant smell may Replace the motor. be produced. Apart from the above mentioned, check the following: Both light and motor do not work Oil leakage Vibration Light is damaged. Replace the light. Power cord is loose.
Maintenance schedule: To ensure the appliance continues to operate at peak performance, we recommend a routine service call every 3 years for the life of the appliance. FOR SPARE PARTS OR TO FIND THE ADDRESS OF YOUR NEAREST STATE SPARE PARTS CENTRE IN AUSTRALIA MIDEA HOME APPLIANCES AUSTRALIA PTY LTD 11/75 Lorimer Street, Docklands, Melbourne, 3008 After-sales service No.
