PART Ⅰ: Generic Version Please read this manual carefully before using the dishwasher Keep this manual for future reference.
CONTENTS 3 SAFETY INFORMATION 8 PRODUCT OVERVIEW 9 USING YOUR DISHWASHER 9 Basket Used Tips 11 MAINTENANCE AND CLEANING 11 14 External Care Internal Care Caring For The Dishwasher 15 INSTALLATION INSTRUCTION 15 19 About Power Connection Water Supply And Drain Connection Of Drain Hoses Position The Appliance Free Standing Installation Built-In Installation(for the integrated model) 24 TROUBLESHOOTING TIPS 27 LOADING THE BASKETS ACCORDING TO AS/NZS 2007.
SAFETY INFORMATION WARNING When using your dishwasher , follow the precautions listed below: This appliance is intended to be used in household and similar applications such as: -staff kitchen areas in shops, offices and other working environments; -farm houses; -by clients in hotels, motels and other residential type environments; -bed and breakfast type environments.
supervision or instruction concerning use of the appliance by a person responsible for their safety.(For IEC60335-1 ) Packaging material could be dangerous for children! This appliance is for indoor household use only. To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid. Please unplug before cleaning and performing maintenance on the appliance. Use a soft cloth moistened with mild soap, and then use a dry cloth to wipe it again.
Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician. Do not abuse, sit on, or stand on the door or dish rack of the dishwasher. Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out. Do not place any heavy objects on or stand on the door when it is open. The appliance could tip forward.
Do not wash plastic items unless they are marked “ dishwasher safe” or the equivalent. For unmarked plastic items not so marked, check the manufacturer's recommendations. Use only detergent and rinse agents recommended for use in an automatic dishwasher. Never use soap, laundry detergent, or hand washing detergent in your dishwasher. The door should not be left open, since this could increase the risk of tripping.
Disposal For disposing of package and the appliance please go to a recycling centre. Therefore cut off the power supply cable and make the door closing device unusable. Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling.
PRODUCT OVERVIEW IMPORTANT: To get the best performance from your dishwasher, read all operating instructions before using it for the first time. Top spray arm Inner pipe Lower spray arm Salt container Filter assembly Dispenser upper spray arm Cutlery rack Cup rack Upper basket Lower basket NOTE: Pictures are only for reference, different models may be different. Please prevail in kind.
USING YOUR DISHWASHER Before using your dishwasher : Inside Outside 1. Loading the basket 2. Fill the rinse aid dispenser (Please check the section 1 of PART Ⅱ: Special Version) 3. Fill in detergent (Please check the section 1 of PART Ⅱ: Special Version) Basket Used Tips Adjusting the upper basket Type 1: The height of the upper basket can be easily adjusted to accommodate taller dishes in either the upper or lower basket.
Type 2: 1 To raise the rack to the upper position, lift rack until both sides are at the same height. The rack will secure into place. 2 To lower the rack, push down on the handle and release. Folding back the cup shelives To make room for taller items in the dishwasher basket, raise the cup rack upwards. You can then lean the tall glasses against it. You can also remove it when it is not required for use. Folding back the rack shelives The spikes are used for holding plates and a platter.
MAINTENANCE AND CLEANING External Care The door and the door seal Clean the door seals regularly with a soft damp cloth to remove food deposits. When the dishwasher is being loaded, food and drink residues may drip onto the sides of the dishwasher door.These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any deposits should be wiped off before the door is closed.
Coarse filter Main filter Fine filter Open 1 Hold the coarse filter and rotate it anticlockwise to unlock the filter. Lift the filter upwards and out of the dishwasher. 2 The fine filter can be pulled off the bottom of the filter assembly. The coarse filter can be detached from the main filter by gently squeezing the tabs at the top and pulling it away. 3 Larger food remnants can be cleaned by rinsing the filter under running water. For a more thorough clean, use a soft cleaning brush.
Spray arms It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets and bearings. To clean the spray arms, follow the instructions below: 1 To remove the upper spray arm, hold the nut in the centre still and rotate the spray arm counterclockwise to remove it. 3 Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after rinsing them thoroughly. 13 2 To remove the lower spray arm, pull out the spray arm upward.
Caring For The Dishwasher Frost precaution please take frost protection measures on the dishwasher in winter. Every fter washing cycles,please operate as follows: 1. Cut off the electrical power to the dishwasher at the supply source. 2. Turn off the water supply and disconnect the water inlet pipe from the water valve. 3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water) 4. Reconnect the water inlet pipe to the water valve. 5.
INSTALLATION INSTRUCTION WARNING Electrical Shock Hazard Disconnect electrical power before installing dishwasher. Failure to do so could result in death or electrical shock. Attention The installation of the pipes and electrical equipments should be done by professionals. About Power Connection WARNING For personal safety: Do not use an extension cord or an adapter plug with this appliance. Do not, under any circumstances, cut or remove the earthing connection from the power cord.
Water Supply And Drain Cold water connection Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear. This precaution is needed to avoid the risk of the water inlet to be blocked and damage the appliance.
Connection Of Drain Hoses Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making sure to avoid bending or crimping it. The height of drain pipe must be less than 1000mm. The free end of the hose must not be immersed in water to avoid the back flow of it.
Position The Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either to the right or the left sides to facilitate proper installation. Levelling the appliance Once the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of the screwing level of the feet.
Underneath existing work top a (when fitting beneath a work top) In most modern fitted kitchens there is only one single work top under which cabinets and electrical appliances are fitted. In this case remove the work top of the dishwasher by unscrewing the screws under the rear edge of the top (a). b a b Attention After removing the work top, the screws MUST BE screwed again under the rear edge of the top (b).
2. If dishwasher is in stalled at the corner of the cabinet, thereshould be some space when the door is opened. Dishwasher Cabinet Door of dishwasher Minimum space of 50mm NOTE: Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side. Step 2. Aesthetic panel's dimensions and installation The aesthetic wooden panel could be processed according to the installation drawings.
Full-integrated model Install the hook on the aesthetic wooden panel and put the hook into the slot of the outer door of dishwasher (see figure A). After positioning of the panel, fix the panel onto the outer door by screws and bolts (See figure B). A B 1.Take away the four short screws 2.Pin up the four long screws Step 3. Tension adjustment of the door spring 1. The door springs are set at the factory to the proper tension for the outer door.
Step 4. Dishwasher installation steps Please refer to the specified installation steps in the installation drawings. 1. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip is flush with edge of work surface. (Step 2) 2. Connect the inlet hose to the cold water supply. 3. Connect the drain hose. 4. Connect the power cord. 5. Place the dishwasher into position. (Step 4) 6. Level the dishwasher.
Step 5. Levelling the dishwasher Dishwasher must be level for proper dish rack operation and wash performance. 1. Place a spirit level on door and rack track inside the tub as shown to check that the dishwasher is level. 2. Level the dishwasher by adjusting the three levelling legs individually. 3. When level the dishwasher, please pay attention not to let the dishwasher tip over. Check level front to back Check level side to side UP DOWN NOTE: The maximum adjustment height of the feet is 50 mm.
TROUBLESHOOTING TIPS Before Calling For Service Reviewing the charts on the following pages may save you from calling for service.
Problem Dishwasher doesn't start Dishes not drying enough Spots and filming on dishes Possible causes Solution Dishwasher won't start Shut the door completely make sure it is latched Power supply or power line is not connected Delay Start option has been selected Check and connect the power supply Refer to Delay Start section in this manual to reset Child Lock activated (selected models) Deactivate the child lock, refer to child lock section in this manual Detergent dispenser is empty Fill rins
Problem Dishwasher leaks Black or gray marks on dishes Stained tub interior Noises Dishwasher won't fill Possible causes Excessive suds caused by using the improper detergent Solution Make sure to use only the proper dishwasher detergent Dishwasher is not level Level the dishwasher Aluminum utensils have rubbed against dishes Rearrange the dishes Make sure the inlet water is no less than 120H Coffee and tea soil Using an approved spot cleaner to remove the soil Reddish stain Some tomato-based
LOADING THE BASKETS ACCORDING TO AS/NZS 2007.1: 1.Upper basket: 3 3 Item Number 1 1 1 Cups 2 Saucers 3 Glasses 2 2.
3.Cutlery basket: 5 2 4 1 3 1 3 4 5 Number 1 2 3 4 5 Item 1 Soup spoons 2 Forks 3 Knives 4 Teaspoons 5 Dessert spoons Information for comparability tests in accordance with (*AS/NZS 2007.1 ) Capacity: 10 place settings Position of the upper basket: lower position Program: ECO Rinse aid setting: 6 Detergent(Pre/main): 5g/22.
PART Ⅱ: Special Version MDW45FSS Please read this manual carefully before using the dishwasher and Keep this manual for future reference.
CONTENTS 4 USING YOUR DISHWASHER 4 11 Control Panel Preparing And Loading Dishes Function Of The Rinse Aid And Detergent Filling The Rinse Aid Reservoir Filling The Detergent Dispenser 12 PROGRAMMING THE DISHWASHER 12 14 Wash Cycle Table Starting A Cycle Wash Changing The Program Mid-cycle Forget To Add A Dish? 15 ERROR CODES 16 TECHNICAL INFORMATION 6 5 9 10 13 13 NOTE: If you cannot solve the problems by yourself, please ask for help from a professional technician.
QUICK USER GUIDE Please read the corresponding content on the instruction manual for detailed operating method. 1 Install the dishwasher (Please check the section 5 “INSTALLATION INSTRUCTION ” of PART Ⅰ: Generic Version.
USING YOUR DISHWASHER Control Panel 1 4 3 2 7 8 9 8 10 11 6 5 Operation (Button) 1 Power Press this button to turn on your dishwasher, the screen lights up. 2 Delay Press this button to set the delayed hours for washing. You can delay the start of washing up to 24 hours. One press on this button delays the start of washing by one hour. 3 Alt Press the button to select either upper basket or lower basket loaded, and the response indicators ( ) will be lit.
Display To show the reminding time, delay time, error code etc. 7 Rinse Aid 8 Warning indicator If the “ ” indicator is lit, it means the dishwasher is low on dishwasher rinse aid and requires a refill. Water Faucet If the “ 9 Progress indicator ” indicator is lit, it means the water faucet closed. Program end when the program is end, the indicator will be lit. Auto Auto sensing wash, lightly, or heavily soiled crockery, with or with out dried-on food.
Preparing And Loading Dishes Consider buying utensils which are identified as dishwasher-proof. For particular items, select a program with the lowest possible temperature. To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the program has ended.
Recommendations for loading the dishwasher All utensils are placed in the way that the spray arms can rotate freely during washing. Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that water cannot collect in the container or a deep base. Dishes and items of cutlery must not lie inside one another, or cover each other. To avoid damage, glasses should not touch one another.
Loading the upper basket The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and tea cups and saucers, as well as plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they will not get moved by the spray of water.
Function Of The Rinse Aid And Detergent The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to use liquid rinse aids. WARNING Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Filling The Rinse Aid Reservoir Rinse-Aid indicator 1 To open the dispenser, turn the cap to the "open" (left) arrow and lift it out. 2 Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow. NOTE: Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next wash. 3 Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Filling The Detergent Dispenser Push latch to open A 1 Press the release catch on the detergent dispenser to open the cover. B 2 Add detergent into the larger cavity (A) for the main wash cycle . For more heavily soiled wash loads, also add some detergent into the smaller cavity (B) for the pre-wash cycle . 3 Close the cover and press on it until it locks into place. NOTE: Be aware that depending on the soiling of water, setting may be different.
PROGRAMMING THE DISHWASHER Wash Cycle Table The table below shows which programs are best for the levels of food residue on them and how much detergent is needed. It also show various information about the programs. ( )Means: need to fill rinse into the Rinse-Aid Dispenser. Program Auto Intensive Heavy Normal (*AS/NZS 2007.
Program Rapid Description Of Cycle Detergent Pre/Main Running Time(min) Energy (Kwh) Water (L) Wash(45℃) Rinse(50℃) Rinse(55℃) 20g 30 0.7 10 15 0.02 3.5 Pre-wash Rinse Aid Soak NOTE: *AS/NZS 2007.1: This program is the test cycle. The information for comparability test in accordance with *AS/NZS 2007.1. Starting A Cycle Wash 1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load the lower basket first, then the upper one. 2.
1. 2. 3. 4. Press the Start/Pause button to pause the washing. Press Program button for more than 3 seconds - the program will cancel. Press the Program button to select the desired program. Press the Start/Pause button, after 10 seconds, the dishwasher will start. 3 sec Forget To Add A Dish? A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow the instructions below: 1. Press the Start/Pause button to pause the washing. 2.
ERROR CODES If there is a malfunction, the dishwasher will display error codes to identify these: Codes Meanings Possible Causes E1 Longer inlet time. Faucets is not opened, or water intake is restricted, or water pressure is too low. E3 Not reaching required temperature. Malfunction of heating element. E4 Overflow. Some element of dishwasher leaks. E8 Failure of orientation of distributary valve. Open circuit or break of distributary valve.
TECHNICAL INFORMATION W D1 H D2 Height (H) 845mm Width (W) 448mm Depth (D1) 600mm (with the door closed) Depth (D2) 1175mm (with the door opened 90°) 16
Product fiche Manufacturer MIDEA Type / Description MDW45FSS Standard place settings 10 Energy efficiency class 3.5 Water consumption class 3.5 Standard cleaning cycle Normal Energy consumption of the standard cleaning cycle 0.
