Installation Guide

7
Safety
Precautions
Installation
Requirements
Installation
Instructions
Tools Needed
Tubing Cutter Hole Saw Set Drill and Bits
Wire Stripper
KEY CONNECTION POINTS
Front Back
a
b
c
a Water Connection
b Electrical Junction Box
c Drain Hose Connection
LOCATION REQUIREMENTS
IMPORTANT:
•
Do not run drain lines, water lines or electrical wiring where they can
interfere with or contact dishwasher motors or legs.
•
The location where the dishwasher will be installed must provide
clearance between motors and flooring. Motors should not touch the
floor.
•
The opening must have a level floor. (If floor at front of opening is
not level with floor at rear of opening, shims may be needed to level
dishwasher).
•
Do not install dishwasher over carpeted flooring.
•
The dishwasher must be fully enclosed on the top, sides and back and
must not support any part of the enclosure.
•
The dishwasher must be installed so that the drain hose is no more
than 10 ft in length for proper drainage.