Installation Guide

14
Safety
Precautions
Installation
Requirements
Installation
Instructions
3. Extend the leveling legs from the base of the dishwasher by the length
indicated in the following chart. Take into account any built-up flooring
which may need to be added to the rear foot adjustment.
NOTES:
•
If the floor was built up in for the front of the dishwasher, account
for this difference when adjusting the rear leveling legs.
•
Final leveling leg adjustments will be made following installation
into the opening.
a
a Adjust Leveling
Legs to Installation
Height
Leveling Leg Adjustment
Opening Height Front Legs Back Legs
34" 0 0
34
 " 0  "
34
 "  "  "
34
 "  "  "
35"
 " 1"
INSTALL 90° ELBOW
1. Wrap the 90° elbow with thread seal tape.
NOTES:
•
Do not use plumber’s putty.
•
To avoid damaging the water valve bracket and/or fitting, do not
over tighten the elbow.