Specifications

26
SWITCHING THE APPLIANCE ON AND OFF
Press to switch the appliance on– the lamp lights up permanently.
The current air humidity in the room is now shown on the display. You now have the option of selecting one of
two operating modes:
Standard Dehumidication
Press the buttons to select the desired air humidity (this then flashes in the display). The appliance starts dehu-
midifying automatically and switches off as soon as the level set is reached. The current room temperature is shown
permanently in the display. We recommend a relative room humdity of approx. 60% for optimum comfort.
Continual Dehumidification
Press to start permanent dehumidification irrespective of any previous settings made with the buttons. The
appliance now removes moisture from the ambient air without shutting off – the
buttons are disabled. The
lamp shows that the appliance is set to this mode, and the current ambient air humidity is shown in the display. Press
to stop permanent dehumidifying and the appliance returns to standard mode.
Press
again to switch off the appliance.
The dehumidifier provides two ways of draining off water removed from the air:
Water Tank
1. The water flows into the water tank and is collected. As soon as the tank is full, dehumidifying stops
automatically, the lamps lights up and "P2" appears in the display.
2. Wait a couple of minutes before removing the water reservoir so that any remaining water can drip into
the tank. Do not remove the water tank if the appliance is still in operation. Overflowing water can damage
objects and floor coverings, and may cause an electric shock.
3. To empty the water tank remove the resevoir as illustrated and empty the water tank completely of water.
4. Slide the water tank back into its original position. The control lamps goes out.
EMPTYING WATER OUT OF THE APPLIANCE