Specifications

32
Problem Possible Cause Solution
The appliance does not dehumidify, or
only dehumidifies a little.
4. The air intake or outlet opening is
blocked.
Make sure all openings are free.
5. The room is too large. This is normal.
6. There are too many sources of
moisture in the room.
This is normal.
The appliance functions too loud. 1. The dehumidifier is not correctly
installed, and is unlevel and shaky.
Place the dehumidifier on a flat and
solid surface. If neccesary, place an
insulating mat under the appliance to
reduce sound.
2. The air-filter is blocked. Clean the filter as described under
"Weekly Cleaning".
3. Water is on the floor. Attach the hose.
Ice forms on the evaporator coil. This is normal. The dehumidifier deices automatically.
E1, E2, P1, or P2 appears on the
display
Note: if more than one fault occurs,
the code display sequence is
P2 - E2 - E1 - P1
E1 - Fault: moisture sensor Remove the plug on the appliance and
plug it back in. If the fault continues to
occur, call customer services.
E2 - Fault: temperature sensor Remove the plug on the appliance and
plug it back in. If the fault continues to
occur, call customer services.
P1 - Appiance is deicing Let the appliance deice. The fault will
no longer occur once the appliance
is deiced.
P2 - Collection tank is full Empty the collection tank and attach it
again correctly.