Operating instructions

55
GB
ELECTRONIC CONTROL PANEL
1/O
Activate/deactivate the appliance Pressing this button activates the appliance – the POWER indicator lamp now illuminates permanently.
Pressing this button deactivates the appliance – the POWER indicator lamp extinguishes.
POWER
Indicator lamp: When the appliance is connected to the mains for the first time, the small lamp flashes
slowly. Once the appliance is activated, it illuminates permanently (the appliance is ready for operation).
When the appliance is deactivated, the lamp extinguishes.
Required air humidity After the appliance is activated, the humidity setting value can be raised/lowered by repeatedly pressing
this button – the setting range is selected in increments of 5 from 35 % R.H. to 80 % R.H. Dehumidification
starts and ends automatically once the set humidity level is reached.
MODE.
MODE Pressing this button selects the dehumidification mode on the appliance. Pressing the button
repeatedly switches the operating mode in the following sequence: Cont./Wet/Cozy/Dry/Cont. and
so on.
WET
COZY
DRY
WET indicator lamp: This illuminates when WET mode has been selected.
The air dehumidifier will now operate until a relative air humidity of approx. 60 – 70 % is
achieved in the room.
COZY indicator lamp: This illuminates when COZY mode has been selected.
The air dehumidifier will now operate until a relative air humidity of approx. 50 % is achieved in
the room.
DRY indicator lamp: This illuminates when DRY mode has been selected.
The air dehumidifier will now operate until a relative air humidity of approx. 35 % is achieved in
the room.
MODE.
Continuous water removal Pressing this button changes to continuous air dehumidification. Pressing this button again stops this
mode. The appliance then automatically switches to "Standard mode" and will runs until the set air humid-
ity is achieved.
CON T.
Indicator lamp: This illuminates when the appliance is in continuous dehumidification mode.