Operating instructions

60
WATER REMOVAL
Permanent water drain
Should you want to install a permanent water drain, please follow the following instructions:
Ensure that the air dehumidifier is deactivated and pull the mains plug out of the socket.
APPLIANCE TYPE A
Carefully remove the rubber plugs (it two fitted, remove the right hand one) from the back of the appliance (see figure).1.
Now slide a hose onto the drain. Ensure that the hose is fixed onto the water drain and cannot come loose.2.
Now guide the loose end of the hose into an external water drain. Make sure that the hose is at a gradient along its 3.
entire length and that it is not bent, knotted or blocked. This will ensure water can drain safely and freely.
You can now refit the water tank and restart the appliance.4.
Regularly check that the water hose is secure and sealed at both ends.5.
APPLIANCE TYPE B
Carefully remove the rubber cover from the back of the appliance. The hose connection is concealed behind.1.
Remove the water tank. As shown in the Figure (3), the water drain of the appliance is located there (the condensate 2.
normally flows through this drain and into the water tank).
How slide a hose from the back of the appliance through the opening to the front.3.
Then slide the end of the hose onto the water drain from the front. Ensure that the hose is fixed onto the water drain 4.
and cannot come loose.
Now guide the loose end of the hose into an external water drain. Make sure that the hose is at a gradient along its 5.
entire length and that it is not bent, knotted or blocked. This will ensure water can drain safely and freely.
You can now refit the water tank and restart the appliance.6.
Regularly check that the water hose is secure and sealed at both ends.7.
1
 Remove the rubber plugs and connect the
water hose to the drain.
APPLIANCE TYPE A
1
2
3
 Remove the plastic cover.
 Slide the hose through the opening.
 Water drain
APPLIANCE TYPE B