Operating instructions

59
GB
WATER REMOVAL
The air dehumidifier offers you two options for draining the water removed from the air:
Water tank
The water is drained into the water tank and collected there. As soon as the water tank is full, dehumidification is 1.
automatically interrupted, the indicator lamp illuminates and "P2" appears in the display (where fitted).
Wait a few minutes before removing the water container to allow the residual water to drain off. Do not remove the 2.
water tank while the appliance is operating. Overflowing water can damage objects and floor coverings, resulting in
electric shock.
To empty the water tank, remove the container as shown and then empty all the water from the water tank. 3.
Now slide the water tank into its original position. The indicator lamp will extinguish.4.
If the indicator lamp does not extinguish, pull out the water tank again and check whether the float is correctly installed 5.
or whether water or other substances may have accumulated on the float. These must be removed. However, the
float may not be removed under any circumstances as otherwise the automatic dehumidification interrupt will not be
guaranteed and the overflowing water can cause damage.
Now refit the water tank.
1
2
3
 Gently pull out the collector tank.
 Hold the collector tank firmly on both sides and pull it out of the appliance evenly.
 Pour the collected water away.