User`s manual

Operation explanation
8
4.Close the door
5.Instruction on control panel
Jacket
(about 800g cotton)
Jeans
(about 800g)
Towel quilt
(about 900g
cotton)
Long sleeve shirt
(about 300g cotton)
Sleepwear
(about 200g)
Work clothes
(about 1120g)
Short pants
(about 70g cotton)
Socks
(about 50g
mixed-weave)
Mixed-fabric clothes
(about 800g)
Single bedsheet
(about 600g
cotton)
Short sleeve shirt
(about 180g cotton)
The reference weight of dry clothes
Operation explanation
Simple installation Operation explanation
7
1.Preparing before drying
Clothes have to be washed and spun before putting in the dryer.
Put same kind clothes to dry together.
Sort your clothes into loads that take a similar time to dry e.g.
Heavier items form light items, it is suggested change the inner
side of clothes to outside and then put into dryer.
Make sure the decoration and buttons are safe for high
temperatureand will not damage the inner tub of dryer. Make
sure the clothes are well protected.
It is better to turn out the pocket for drying.
Please check the clothes after washing, and if still dirty on
clothes, those dirty may not disappear after drying.
Please make sure the power socket are well connected and will
not touch conduit of water supply and gas supply etc.
2.Make sure the filter is well cleaned and in the right position.
3.Put clothes into the dryer.
It is better to put clothes with 1/3-1/2 capacity of inner tub for
drying because drying needs space to make clothes tumble
evenly and overfilling clothes will not get a good result.
When drying big clothes, it is better to fulfill with small pieces of
clothes together.
When drying expensive or little clothes, it is better to add two
towels so as to reach better drying result.
Do not overdry the clothes to avoid crimple, roughness or static
electricity etc.
5
1
2
3
4
PROGRAM
2
1
Power
Program (extra / middle / light /1 hour)
5
3
4
1)Push Power button;
2)Program setting will according to the texture and capacity of clothes. Every
time pushing the Program button, the indication light will shine orderly for a
while, and stop at the program you choose;
Pause/Start
Crease Guard
Heat (full / half / airing)
Note:Push Program and Heat at the same time, function could be changed to Lock.