User Manual

IMPORTANT INFORMATION ABOUT INSTALLING

• The appliance is NOT intended for use in a commercial environment.

• Please observe the installation instructions provided and note that the appliance shall only be

installed by a qualied technician.

• The appliance is tted with a plug and must only be connected to a properly installed earthed

socket.

• In case a new socket is needed, installation and cable connection must only be done

by a qualied electrician. If the plug is no longer accessible following installation, a pole

disconnecting device must be present on the installation site with a contact gap of at least

3 mm.

• Adapters, multiway strips and extension cords must not be used. Overloading can result in re.

• If the appliance is not tted with a supply cord and a plug, the connection equipment must

have a contact separation in all poles that provide full disconnection, and the appliance must

be incorporated in the xed wiring in accordance with the wiring rules.

The accessible surfaces may get

hot during operation.