User Manual

11
Fully insert the appliance and centre it.
Do not kink the connecting cable.
Screw the appliance into place.
The gap between the worktop and the appliance must not be closed by additional battens.
Important information
Electrical connection
The appliance is tted with a plug and must only be connected to a properly installed earthed
socket. Only a qualied electrician who takes the appropriate regulations into account may install
the socket or replace the connecting cable. If the plug is no longer accessible after installation, an
all-pole isolating switch must be present on the installation side with a contact gap of at least
3 mm. Contact protection must be ensured during the installation.
Fuse protection: see instructions for use-technical data.