Full Product Manual

Page 18

D. Check the level again and

ensure the bracket feels secure.

After making any necessary

adjustments, insert the cotter

pins into the Main Support Pins.

Cotter Pin

Fig. 7

Fig. 10

Cover holes with

Bracket Sealing Foam

Cover holes with

Bracket Sealing Foam

E. If necessary, cover the holes on the front of the bracket with the Bracket Sealing Foam.

Secure the bracket to the windowsill by

drilling 1/8” pilot holes and installing the

1/2” Type A screws as shown in Fig. 9.

If your window has a lip, make sure the

bracket is placed as shown in Fig. 8.

Installation

Instructions

INSIDE

OUTSIDE

Vinyl-Clad Windows

Vinyl Lip

Fig. 8

Fig. 9

1/2” Type A

1” Type A

(Flat Sill)

1” Type A

(Flat Sill)

If your window does not have a lipped sill, be sure

to drill 1/8” pilot holes and install the 1” Type A

(Flat Sill) screws as shown in Fig. 9 below.