WiFi User Manual

 Page 11 
Network
Configurations
7.3.4 For Android devices, you may
choose to scan the QR code on
the air conditioner for setup. If
not using a QR code, or if you are
using an iOS device, skip this step.
7.3.3 Press and hold VENT ANGLE/
SWING (on Portable AC) or WIFI/
WIRELESS (on Window AC)
buttons for 3-5 seconds. The unit
will enter Access Point mode and
the display will show “AP”.
NOTES
On Portable AC, you can also use the
remote controller by pressing the LED
button 7 times.