Operating Instructions and Installation Instructions

3. INSTALLATION METHOD

Connect the female joint of the wires group from the mainboard

with the male joint of the connective wires group. (See Fig.3-3(A))

Connect the other side of the connective wires group with the male

joint of the wires group leads from the wire controller.(See Fig.3-3(A))

Fig 3-3(A)

Mainboard

4-core shielding wire

3.Wiring figure

Model A:KJR-120G2/TFBG-E(12V)

Model B:KJR-120G1/TFBG-E(5V)

The connection cable

CN40

Fig 3-3(B)

Adapter board

Display board

4-core shielding wire

The connection

cable

CN101