Operating Instructions and Installation Instructions

10. OPERATION

Up-Down airflow direction and swing

1.Every time the user presses SWING, the louver swings six degrees.

2.Press and hold SWING for 2 seconds, it changes to the

UP−DOWN SWING mode. Press SWING again to stop.

When the Up-Down swing function is activated,the mark appears.

(Not applicable to all the models)

The operation can refer to the following instructions for the unit with

four Up-Down louvers can be operated individually.

-0

-1

-2

-3

-4

1.Press the Swing button to activate the Up-Down

adjusting louver function.

The mark will flash.(Not applicable to all the models)

2.Pressing the button “+” or“-” can select the movement

of four louvers.Each time you push the button,the wire

controller select in a sequence that goes from:(the icon

means the four louvers move at the same time.)

3. And then use Swing button to adjust the Up-Down airflow direction

of the selected louver.

-0

Use SWING to adjust the up and down airflow direction.

Swing function

(For the unit without left & right auto swing function models)

Swing