AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. CR090-RG52A 2020550A7394 20130423 Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.
Handling the remote controller CONTENTS Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. Keep the remote controller where its signals can reach the receiver of the unit. Handling the remote controller ...................................................... 2 Remote controller Specifications................................................... 3 Function buttons ..................
Function buttons Remote Controller Specifications Model RG52A4/BGCEF RG52A4/BGEF. Rated Voltage 3.0V(Dry batteries R03/LR03 2) Signal Receiving Range 8m Environment -5 C~ 60C 1 ON/OFF Button Operation starts when this button is pressed and stops when this button is pressed again.
9 10 9 1 2 ON/OFF SILENCE FP MODE TIMER ON 10 11 TEMP 3 4 5 FAN SLEEP FRESH TURBO SELF CLEAN 6 7 8 TIMER OFF LED FOLLOW ME 12 13 14 15 11 12 UP Button( ) Push this button to increase the indoor temperature setting in 1oC increments to 30oC. DOWN Button( ) Push this button to decrease the indoor temperature setting in 1oC increments to 17oC. SILENCE/FP Button Active/Disable SILENCE function.
How to use the buttons Indicators on LCD Mode display Displays the current operation mode. Including auto( ), cool( ), dry( ), heat( ) (be applicable to cooling & heating models only ), fan( ) and back to auto( ). Auto operation Transmission Indicator This transmission indicator lights when remote controller transmits signals to the indoor unit. ON/OFF display Displayed by pressing the ON/OFF button. Press the ON/OFF button again to remove. TIMER ON display Displayed when TIMER ON time is set.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. Dehumidifying operation 2 3 ON/OFF SILENCE FP 1 MODE TIMER ON TEMP FAN TIMER OFF Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select DRY mode. 2. Press the UP/DOWN buttons to set the desired temperature.
TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. ! CAUTION The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
TIMER ON TIMER OFF (Off Start Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. Start Stop Off Set 2 hours later after setting 5 hours later after setting Example: To start the air conditioner 2 hours after setting, and stop it 5 hours after setting. 1. Press the TIMER ON button. 2. Press the TIMER ON button again to display 2.0H on the TIMER ON display. 3. Press the TIMER OFF button. 4.
