Scan&Go™ 1217G1S Operation Instruction FlashChef™ Series Product
Part One：General Instructions 1. Please use two or more people to move and install this microwave oven. Failures to do so can result in back or other injury. 2. The rated voltage for this microwave oven is 120V/60Hz. Output power: 1200 Watts. 3. The screen reads “ECO” in stand-by mode, “Scan” when the oven door is open and ready to scan. Part Two：PC Software 1. Introducing the function menus: a. “Open” is to open the existing “.database” files, which contains Auto and Barcode menu information.
more language choices like Spanish and Japanese on this software. 2. Two kinds of files: “.database” file and “COOKDATA” folder. a. “.database” files are produced by the PC software through “save” or “save as” options, and this file can be re-loaded to the software to get the menu information. The “.database” file can be renamed. It is designed for the management of menus. b. “COOKDATA” is a file folder produced through “Export all”. It is for the update of menus through USB Port.
3. Auto menus a. Editing the number, time, and power level for each recipe. b. “Clear Auto” means delete all Auto recipes currently on the software. We can frequently use database file to keep recipe record in case deleting the menu by mistake. c. “Export All” means exporting all recipes currently on the software, both Auto Menus and Barcode Menus, to get a “COOKDATA”. 4. Barcode Menus: a. Edit the name, cooking time, power level and stages of each recipe. b.
c. Select the recipes you want to update through QR code, and click “QR Code” button, a QR code will be produced. d. As many as 1000 barcode menus can be managed by the PC software and loaded into database file. While for now one QR code can only support the upgradation of 20 recipes. Part Three: Update recipes through USB disk. 1. Put the newest version of “COOKDATA” produced from the PC software in the root directory of the USB disk. 2. Insert the disk, press “USB Port” button on the unit.
2. Open the door, put the QR code under the scanner when it is stand-by. 3. A beep indicates that the update complete. Part Five：Operation tips of the Scan&Go Microwave 1. There is two settings to start the cook: a. Close the door and cook b. Close the door, and press ”start”, then cook. c. These two settings can be chose: with the oven door open, press and hold button ”2” for few seconds, the unit will enter setting mode.
