Installation Guide

a. Open the door，press number button "1" for 5 seconds,"PROGRAW" displays.

b. Press number button "3", after two seconds, the screen will display the related

time.

c. Press "1","2","5" to input the cooking time. "1:25" displays.

d. Press " " button and " 1:25 70" displays. The ﬁrst stage is ﬁnished.

e. Press " ", "STAGE-2" displays.

f. Press "5", "4","0" button, "5:40" displays.

g. Press " " button and "5:40 50 " displays. The second stage is ﬁnished.

h. Press " " button to save the program.

11.Double Quantity cooking

1) If the "X2" button is pressed in Ready Mode, followed by the starting of a Preset

Program, or if the "X2" button is pressed in 5 secondes of starting a Preset

Program, the oven will start cooking with the quantity preset cooking time.

2) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display

the quantity preset time.

For example, number button "5" and its preset time is 1 minute. Then press "X2", then

time will change to 1:00*2=2 (2 minutes)

12. Factory-default setting

In Ready Mode, presssing " " and"0" simultaneously will put the oven into

Factory-default Setting Mode.

1) Press " " and " 0 ", the beep tone sounds once,and the screen will display

"CHECK" If it is in the Factory-default Mode, the screen will display "11" , after three

seconds, the oven turn to the Ready Mode . Or press" " to cancel the display

ang back to ready back in the process of display.

If not in the Factory-default Mode, the screen will display " 00 ", press" "to the

Factory-default Mode,the screen will display " CLEAR ". the beep tone sounds once,

after self-testing, the screen will display""11or ""00.

2) If do not press " " when the screen display " 00 ",the setting will cancel after

10 seconds.

Note: Be careful in the operationas it will restore all conﬁgure to Factort-default Mode.

OPERATION INSTRUCTION