Unit installation

2. OUTDOOR UNIT
(1) Service cover removal
• Remove the two mounting screws.
• Remove the service cover by pushing downwards.
Direction of the service
panel removal
Service cover
Hook
(3 places)
(2) Fasten the power supply cord and the connection cord to the conduit
holder using the lock nut.
(Open the knock out holes with the tool so as not to transform conduit
plate if necessary.)
(3) Connect the power supply cord and the connection cord to terminal.
(4) Fasten the power supply cord and connection cord with cord clamp.
Power cord
Knockout hole
Connection cord
Lock nut
Power cord
UNIT D connection cord
UNIT C connection cord
UNIT B connection cord
UNIT A connection cord
36 type
24 type
(5) Put the service cover and valve cover back after completion of the
work.
Power cord
UNIT B connection cord
UNIT A connection cord
Conduit plate
WARNING
Install the code perfectly. Imperfect installation may cause
a risk of fire or electric shock due to dust or water.