Instruction manual

Rotary Microtome HM 355 S
MICROM International GmbH
Robert-Bosch-Str. 49
D- 69190 Walldorf
2-17 LARGE FIELD MAGNIFIER
The large field magnifier (fig. 25) is for looking at
section production.
The light is connected to the power outlet with the
power cord (fig. 25.2) and turned on and off with
the switch (fig. 25.3).
CAUTION! Before using the large field
magnifier for the first time, please check if the
voltage conditions at the installation site comply
with the power requirements and frequency
mentioned on the supply unit of the magnifier.
Fig. 25