User`s manual

Page 9
Method 2: Using a command prompt
1) Obtain the MAC address from the label on the Network Interface Card labels on top. Each Interface
card has a unique MAC address.
2) Use the ARP command to set the IP address.
Example:
To assign the IP Address 192.168.20.240 for the Network Interface Card, which has a MAC
address of 00-0C-15-00-00-01 you will type in the following command prompt from a PC connected
to the same network as the Network Interface Card.
1. Type in “arp-s 192.168.20.240 00-0C-15-00-00-01” then press Enter.
3) Use the Ping command to assign a size of 123 bytes to the IP.
1. Type in “ping 192.168.20.240 -1 123” then press Enter
2. If the replies are received, your computer can communicate with the IP address.
To select an IP address for the Network Interface Card, please refer to Appendix 1.