User`s manual

Page 7
Figure 1. The main window of the “Middle Atlantic UPS-IPCARD Setup Utility” program.
4) Select the SNMP card you are setting up. Click on the Tools menu and select “Device Setup” or double
click the SNMP card you want to configure.
5) You can modify the IP Address, Subnet Mask, and Gateway address for the Device MAC Address
listed in the Device Network Settings window, as shown in Figure 2. The default IP Address is
192.168.20.177, the default Subnet Mask is 255.255.255.0.
Figure 2 - The SNMP card-setting window
6) To modify the IP Address, Subnet Mask, or Gateway Address, enter the new addresses into the
corresponding fields.