User`s manual

Page 6

LINK Indicator
Ethernet connector
RX/TX Indicator












Definitions for LED Indicators

Link LED color Condition
Off
The Network Management Card is not
connected to the Network/or the Network
Interface Card Power is off.
On(Yellow)
The Network Interface Card is connected to
the Network.
RX/TX LED
color
Off The Network Interface Card power is off.
On(Green) The Network Interface Card power is on.
Flashing
- Receiving/transmitting data packet.
- Reset finished.

Step 2 - Configure the IP address for the Middle Atlantic Network Interface Card.
Method 1: Using the Middle Atlantic Power Device Network Utility Tool
1) Install the Middle Atlantic Power Device Network Utility Tool from the included CD. It is located
on the CD in the \software folder. Double click the “Middle Atlantic UPS-IPCARD Setup Utility”
installation file, “MAP_SNMP_Setup.msi” to begin the installation.
2) After installation is complete, run the “Middle Atlantic UPS-IPCARD Setup Utility” program. Under
“All Programs”, select “Middle Atlantic UPS-IPCARD Setup Utility.”
3) The main dialog of the “Middle Atlantic UPS-IPCARD Setup Utility” program is shown in Figure
1. The configuration tool will display all Middle Atlantic network cards of present on the same
network. The "Refresh" button is used to search the entire local network for SNMP cards.