User`s manual

SNMP SERVICE
SNMP SERVICE:
Allow Access: Sets the SNMP service to either Enabled or Disabled
SNMP ACCESS CONTROL
Community Name: The name used to access this community by a Network Management System (NMS). The field must
be 1 to 15 characters in length.
IP/Host Name: The IP address or IP address mask accessible by the NMS. A specific IP address allows access only by
the NMS with the specified IP address. The 255 is regarded as the mask and the rules are as follows:
• 192.168.20.255: Access only by an NMS on the 192.168.20 segment
• 192.255.255.255: Access only by an NMS on the 192. segment
• 0.0.0.0 (the default setting) or 255.255.255.255: Access by any NMS on any segment
Access Type: The allowable action for the NMS through the community and IP
Read Only - GETs permitted but SETs not permitted
Write/Read - GETs permitted, SETs permitted unless someone is logged in the web interface
Forbidden - No GETs or SETs
Page 39