User`s manual

DIAGNOSTICS
DIAGNOSTICS:
Initiate: Start the battery test immediately
BATTERY TEST: During a battery test the UPS will switch to battery mode to verify that the batteries are good.
Use this test to perform a quick battery test. You can also view the date and time of the last test
PERFORM A BATTERY TEST:
1. Click the “Initiate” button, and you will hear a beeping sound while the test is being performed
2. Battery Test will report the result after the latest test is completed and display as follows:
LAST TEST RESULT:
PASSED: The battery works normally.
NONE: The battery has not been tested.
FAILED: The UPS battery test failed.
FORBIDDEN: Battery missing or internal error.
LAST TEST DATE: Shows the date of the last test performed.
SUGGESTIONS IF THE BATTERY TEST FAILED:
1. Clear “Remaining Runtime is Insufficient” event and/or the “Output is Overloaded”
event and run another battery test.
2. Replace the batteries if the battery test fails again.
3. Contact Middle Atlantic Products for assistance if the battery test fails after the
Batteries have been replaced.
Page 18