User manual

RM-KB-LCD17x8/16KVM User Manual

Preparation

To prepare for the firmware upgrade, do the following:

1. Use the Firmware Upgrade Cable (provided with this unit), to connect a

COM port on your computer to the Firmware Upgrade Port of your

switch.

2. Shut down all the computers connected to the KVM ports.

3. From your KVM switch console, login to the OSD as the administrator

(see page 33) and select the F4 ADM function.

4. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to

invoke Firmware Upgrade mode (see page 42.).

Note: During Firmware Upgrade mode, the port LEDs will flash on and off.