Control Centre Manual
Table Of Contents
- PRO6 Control Centre
- IMPORTANT SAFETY INSTRUCTIONS
- INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
- PRO6 EC-Declaration of Conformity
- Licences
- Precautions
- Recommandations
- Avertissements de sécurité
- Recommandations générales
- Puissance
- Manipulation de l'équipement
- Installation
- Lieu d'installation
- Connexions audio
- Electrostatic discharge (ESD) precautions
- Interférences radioélectriques - Dispositif de Classe A
- Champs électriques
- Équipement de sécurité
- Équipement en option
- Accessoires spéciaux
- Contents
- Overview
- Operation
- Chapter 4: Before You Start
- Chapter 5: Working With The Control Centre
- Chapter 6: Navigation
- Chapter 7: Patching
- Chapter 8: Basic Operation
- Setting a mic amplifier’s input gain
- Setting the high and low pass filters
- Input equalisation (E zone)
- Input dynamics processing (D zone)
- Output processing
- Using VCA/POP groups
- Setting up a mix
- Using fader flip
- Setting up the effects rack
- Simple routing to master stereo outputs
- Scene and show management (automation)
- Configuring the inputs and outputs
- Using copy and paste
- User library (presets)
- Surround panning
- Two-man operation
- Saving your show files to a USB memory stick
- External AES50 synchronisation
- Security (locking mode)
- Connecting And Setting Up The System
- Appendices
79
PRO6 Control Centre
Quick Reference Guide
Appendix A: Troubleshooting
This appendix gives a brief troubleshooting guide to your system.
No audio
If you have set up your system and followed all of the instructions for obtaining audio,
but you are not hearing anything through the speakers, check the following:
• Make sure the appropriate ST buttons in the input fast strips are on.
• Make sure the appropriate ST buttons in the source a/b panels (monitors section of
the master bay) are on.
• Make sure nothing is muted.
• Make sure no faders are set to minimum.
• Check that the VCA/group master faders are at unity gain.
• Use solo at selected points in the signal path to try and pinpoint where the signal is
being lost.
• Check for correct signal routing by making sure channel sources/destinations are
correctly assigned.
If you still don’t have any audio, contact Midas Technical Support.
Diagnostics
You can view the Diagnostics screen to get an overview of the current health and
status of the system. The Diagnostics screen shows real-time connectivity of the
system, the health of connected nodes and whether a device is configured or not. The
Diagnostics screen also includes a SWAP HYPERMAC button for changing the current
network from X to Y, and vice versa. For more information, see the PRO Series Owner’s
Manual (part number DOC02-PROSERIES).
The status LED at the top of the screen, which is constantly displayed while the control
centre is switched on, is linked to the status of individual items on the Diagnostics
screen. You can click on it to see what is causing the error.