Control Centre Manual
Table Of Contents
- PRO6 Control Centre
- IMPORTANT SAFETY INSTRUCTIONS
- INSTRUCTIONS DE SÉCURITÉ IMPORTANTES
- PRO6 EC-Declaration of Conformity
- Licences
- Precautions
- Recommandations
- Avertissements de sécurité
- Recommandations générales
- Puissance
- Manipulation de l'équipement
- Installation
- Lieu d'installation
- Connexions audio
- Electrostatic discharge (ESD) precautions
- Interférences radioélectriques - Dispositif de Classe A
- Champs électriques
- Équipement de sécurité
- Équipement en option
- Accessoires spéciaux
- Contents
- Overview
- Operation
- Chapter 4: Before You Start
- Chapter 5: Working With The Control Centre
- Chapter 6: Navigation
- Chapter 7: Patching
- Chapter 8: Basic Operation
- Setting a mic amplifier’s input gain
- Setting the high and low pass filters
- Input equalisation (E zone)
- Input dynamics processing (D zone)
- Output processing
- Using VCA/POP groups
- Setting up a mix
- Using fader flip
- Setting up the effects rack
- Simple routing to master stereo outputs
- Scene and show management (automation)
- Configuring the inputs and outputs
- Using copy and paste
- User library (presets)
- Surround panning
- Two-man operation
- Saving your show files to a USB memory stick
- External AES50 synchronisation
- Security (locking mode)
- Connecting And Setting Up The System
- Appendices
Scene and show management (automation) 59
PRO6 Control Centre
Quick Reference Guide
>> To create a new scene using the current settings
1 Click STORE SCENE.
2 In the Store Scene window (shown right),
type in the scene name.
3 In the Notes panel, type in any scene notes.
4 Do one of the following:
• Click “Insert before scene” to put the new
scene in between the one currently
highlighted in yellow and the scene
immediately before it.
• Click “Store to empty scene” to put the
new scene in the one currently
highlighted in yellow, provided it is empty.
• Click “Store to next scene” to put the new scene in the next one, provided it is
empty.
• Click “Overwrite scene” to overwrite the scene currently highlighted in yellow.
An OK button will appear at the bottom of the window, to the left of the Cancel
button.
The options in the Store Scene window are context-sensitive, so some may be
greyed-out to show that they are unavailable.
5 Click OK. This will store the scene, saving any changes you have made, and
close the window. (Clicking CANCEL will close the window, ignoring any
changes.)