Operator Manual

320 Appendix D: Troubleshooting
PRO2 Live Audio System
Owner’s Manual
>> To proceed after an error message appears
1 Heed the error message.
2 Click OK.
3 Take the appropriate action for that particular error. Refer to Table 14 “List of
error condition messages” on page 320 and Table 15 “List of error description
messages” on page 321.
Automation error messages
An automation error message may be generated by any of the following:
• An attempt to perform a copy and paste is ignored.
• Attempting to assign notes to a scene. The text “There was an error setting the
scene note” will be displayed.
• An attempt to assign MIDI data to a scene is ignored.
• An attempt to set the navigation mode, that is, switching rehearsal mode on or off,
is ignored.
• An attempt to skip/unskip a scene or point scene; see “Rehearsals” on page 173.
• An attempt to assign the default store option is ignored.
• An attempt to assign the rehearsal mode state for all scenes is ignored. (This
functionality is not available to the user.)
• An attempt to set the MIDI navigation mode is ignored. (This functionality is not
available to the user.)
• An attempt to modify the scene list mode is ignored.
Error condition messages
The following table contains the possible error condition messages for both the file and
automation systems. These messages comprise the first line of the error message as
they appear on the GUI.
Table 14: List of error condition messages
System Type Error Message Fault Condition
File Failed to copy file Attempting to copy a file.
File Failed to delete file Attempting to delete a file.
File Failed to rename file Attempting to rename a file.
Automation Failed to copy point scene to
point scene
Attempting to copy one point scene
to another.
Automation Failed to create a new show Attempting to create a new show.
Automation Failed to delete point scene Attempting to delete a point scene.
Automation Failed to expand point scene
range
Attempting to expand point scene
range, that is, by inserting an extra
10 point scenes, for example,
expanding scene 10.00 will add
point scenes 10.10, 10.20 etc., up to
10.90.
Automation Failed to initiate point scene
storage
Attempting to initiate point scene
storage, that is, when clicking Store
on the GUI. (A successful outcome
is to display the ‘Store’ window.)