Operator Manual

Selecting scope parameter sections 179
PRO2 Live Audio System
Owner’s Manual
The Recall Scope screen has a section for each of the following.
>> To open the Recall Scope screen
At either GUI screen, choose home
AutomationRecall Scope.
Selecting scope parameter sections
The scope function buttons provide a number of ways of selecting/deselecting scope
parameters, such as singly, by channel type, all on the control centre etc.
When a parameter is selected, its background changes from blue to green .
Selection is cumulative, so you can combine any of the selection/deselection functions
until all the desired parameter sections have been selected. When you have finished
the selection process, just go to the next screen you require; you don’t have to save
your selection, as it remains stored in the current condition until you alter it again.
The “Assignable Effects” panel lets you choose which effects are ‘out of scene’ on scene
recall.
For details of the parameters affected by scope, see Appendix K "Parameters Affected
By Scope" on page 421.
Description
Input Channels Aux Returns (returns) Aux Sends (auxes) Matrix (matrices) Masters Variable Control Associations (VCA and POP. groups) Assignable Effects (internal effects) and Graphic EQs
Symbol
Routing Yes Yes No No No No N/A
All YesYesYesYesYesYesN/A
Mic Amp
(config)
Yes Yes No No No No N/A
EQ YesYesYesYesYesNo N/A
Dynamics Yes No Yes Yes Yes No N/A
Bus Sends YesYesYesNo YesNo N/A
Mute YesYesYesYesYesYesN/A
Fader YesYesYesYesYesYesN/A
Assignable
Effects/Graphic
EQ
N/A N/A N/A N/A N/A N/A Yes