Operator Manual

338 Appendix D: Troubleshooting
PRO1 Live Audio System
Operator Manual
m
missing file File and
Automation
The required file cannot be
found.
Try again.
missing
navigation state
Automation Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
mtools lookup File and
Automation
Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
n
no CBMA access Automation Automation manager does
not have access to the
current control surface
settings.
Try again or try switching off
the PRO1 Live Audio System
and then switching it back on
again. If the problem
persists, contact Midas
Technical Support.
no next scene Automation There is no next scene
relative to the current
position in the scene list.
This is generated by recalling
the next scene when the
current scene is the last in
the scene list.
Avoid this operation on the
last scene in the cue list.
no previous scene Automation There is no previous scene
relative to the current
position in the scene list.
This is generated by recall
the last scene when the
current scene is 00.00, that
is, the safe scene.
Avoid this operation on the
safe scene.
no scene data Automation The scene contains no scene
notes or MIDI data.
Only carry out this type of
operation on a scene that
contains scene notes or MIDI
data.
no show loaded Automation There is no show loaded. Only carry out this type of
operation with a show loaded.
not in storing
state
Automation The Automation System was
momentarily unable to store
a scene.
Try again. If repeated
attempts fail, contact Midas
Technical Support.
null pointer File and
Automation
Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
p
persistent storage
error
File and
Automation
The GUI or one of its
subsystems is out of date and
cannot interpret the new
failure modes.
Update the GUI and its
subsystems.
If the problem persists,
contact Midas Technical
Support.
point scene index
continuity error
File and
Automation
The show file being modified
is damaged.
This is an indication of a
serious error. Contact Midas
Technical Support.
Error Message System(s) Problem Solution