Operator Manual

Troubleshooting automation 337
PRO1 Live Audio System
Operator Manual
e
empty point
scene index
File and
Automation
An attempt was made to
navigate an empty point
scene index.
Try again. If unsuccessful,
and if the file is a show file,
try a backup file, if one is
available.
event is already
active
Automation Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
f
failed to add to
lock list
File A device or file could not be
‘locked’ to prevent another
task accessing it while it is in
use.
Although, in practice, it is
highly unlikely to occur, this
error may indicate a serious
system failure. Contact
Midas Technical Support.
failed to add
scene
File and
Automation
The scene could not be
added.
Try again.
failed to allocate
memory
Automation The MC was unable to
allocate sufficient memory
(RAM) to complete the task.
Switch off the PRO1 Live
Audio System and switch it
back on again. If the
problem persists, it could be
an indication of a serious
error. Contact Midas
Technical Support.
failed to configure
scope mask
Automation The ‘copy and paste through
scenes’ operation failed.
Try again. If repeated
attempts fail, contact Midas
Technical Support.
failed to create
show
Automation A new show could not be
created.
Try again. If repeated
attempts fail, contact Midas
Technical Support.
failed to
deschedule event
Automation Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
failed to schedule
event
Automation Critical internal error. This is an indication of a
serious error. Contact Midas
Technical Support.
i
immutable scene
(cannot delete
‘safe’ or ‘current’
scene)
File and
Automation
The operation on the current
or safe scene is not allowed.
The safe scene cannot be
edited or deleted and you
cannot store to it. Also, you
cannot delete the scene last
recalled to the control
surface. (Precludes the use
of the Now button.)
Avoid using these types of
operation.
j
jog position is
empty
Automation The current scene is empty. Avoid this type of operation
on an empty scene.
Error Message System(s) Problem Solution