Operator Manual

Troubleshooting automation 335
PRO1 Live Audio System
Operator Manual
Error description messages
The following table contains the possible error description messages for both the file
and automation systems, which will start on the second line of the error message. The
“Error Message” column in the table contains the error message text that immediately
follows the “response:” text. For ease of reference the table lists the error messages in
alphabetical order.
Table 15: List of error description messages
Error Message System(s) Problem Solution
hexadecimal
number
<error code in
hexadecimal>
unknown error
code
File and
Automation
Indication of a possible
system error.
Note down the hexadecimal
value of the error code and
contact Midas Technical
Support, giving them this
value.
a
artefact clone
policy violation
File and
Automation
The cloning of this artefact
(file type) is not allowed.
Avoid using this type of
operation.
artefact creation
policy violation
File and
Automation
The creation of this file type
is not allowed.
Avoid using this type of
operation.
artefact deletion
policy violation
File and
Automation
The deleting of this file type
is not allowed.
Avoid using this type of
operation.
artefact import
violation
File and
Automation
The importing of this file type
is not allowed.
Avoid using this type of
operation.
artefact load
policy violation
File and
Automation
The loading of this file type is
not allowed.
Avoid using this type of
operation.
artefact rename
policy violation
File and
Automation
The renaming of this file type
is not allowed.
Avoid using this type of
operation.
artefact
replication policy
violation
File and
Automation
The replication of this file
type is not allowed.
Avoid using this type of
operation.
artefact save
policy violation
File and
Automation
The saving of this file type is
not allowed.
Avoid using this type of
operation.
attempt to
overwrite existing
data (overwrite
not enabled)
File and
Automation
The operation to save or copy
to the existing file is not
allowed, as files cannot be
overwritten.
Avoid using this type of
operation.
b
bad device File and
Automation
Operation could not be
carried out because the
device, that is, the internal
compact flash of the PRO1 or
USB memory stick (if
connected), does not contain
the required directory
structure.
• If the device is the internal
compact flash of the PRO1,
this could be an indication of
a serious problem. Contact
Midas Technical Support.
• If the device is the USB
memory stick, check that the
device has not been
disconnected from the control
surface.