Quick Start Guide

22 23PRO X Quick Start Guide
Navigating The Mix Buses
The input channels each have aux and matrix mix buses.
Mix sections
(mix bay)
Mix sections
(master bay)
Input fast
strip
1
6
5
43
2
43
2
5
Item Element(s) Description
1
Quick access button — input
fast strip
This button in the mix section of the input fast strips quickly selects the local mix area of the selected channel.
Illuminates (blue) when active.
2
Quick access button — mix
selection
This button in the mix section of the mi
x and master bays quickly selects the bank of the currently selected aux/matrix
bus, assigning it to the local channel strip on the control surface, and also assigning the bus processing area to the local GUI
channel strip.
Illuminates (blue) when active.
3 scroll by 8 buttons These up and do
wn scroll buttons scroll through the mix buses in groups of eight (one bank) at a time.
4 scroll by 1 buttons These up and down scroll buttons scroll through the mix buses one at a time. Mix bus selection follows the scrolling.
5Display Shows the number of the cu
rrently selected mix bus and its type.
6 FLIP button See Controlling The Mix Buses In Flip Mode.
>> To navigate a mix bus to the control surface
Do one of the following:
• • Scroll to the desired mix bus using the scroll by 1 buttons in the mix
section. Mix bus selection follows the scrolling
• • Scroll the desired bank of mix buses to the control surface using the
scroll by 8 buttons in the mix section
• • Select the desired mix bus in the Output Bay and press Align.
>> To select a mix bus
Do one of the following:
• • Scroll buttons - Scroll to the desired mix bus using the scroll by 1
buttons in the mix section. Mix bus selection follows the scrolling
• • Touch sensitive control knobs - With the desired mix bus
assigned to the mix section on the control surface, touch/operate its
control knob.
>> To navigate the mix bus processing area to the channel strip
Press the quick access button in the mix section of the desired input fast strip.
This does not a ect the current population of the output fast zone.
You can selec
t an aux bus or matrix bus processing area on the GUI by clicking
on the title of the desired bank of mix buses in the input channel overview of
the GUI channel strip (see Typical Sends Sections Of The Mixes In The Gui
Channel Strip).