Manual

94 PRO X User Manual
Conguring the number of GEQs (and eects)
GEQ (and eects) conguration is a GUI-only operation. We recommend that you
congure the number of GEQs and eects before you start using the PRO X.
>> To congure the PRO Series Control Centre with the number of
GEQs and eects
1. At the GUI, choose home  Preferences  General
and then click the Show tab.
2. In the Eects and GEQs section, open the drop-down list (as shown below).
3. Select the option you want by clicking it. For example, click the 17 Eects -
28 GEQs option to have 17 internal eects and 28 GEQs.
Typical Eects and Graphic EQs screens as congured for the 17 Eects - 28 GEQs option. Note the
four small racks to the left of the main rack on the Graphic EQs screen, which cater for the 28 GEQs; the
selected rack unit is highlighted in yellow.
Copying settings between GEQs
You can copy and paste all the settings of one GEQ to another.
>> To copy the settings of a GEQ to another GEQ
1. In the GEQ rack of the Graphic EQs screen, open the window of the GEQ that
you want to copy the settings from.
2. In the GEQ window, click COPY.
3. Close the GEQ window and then open the window of the GEQ that you want
to paste the settings to.
4. In the GEQ window, click PASTE.