Manual

Table Of Contents
52 PRO X User Manual
About the devices on the stage and FOH I/O tabs
The following device types will, if congured in the AES50 Device Conguration window (see Figure 14 “Typical AES50 Device Conguration window”), appear on
the I/O tabs of the From and To sections of the Patching screen.
Item Device Type Description Example
AES50 Generic AES50
This is an audio only device that is used to represent the
inputs and outputs of any third party AES50 device.
DL251 Audio
System I/O
DL251A
This device represents module card slots A, B and C of the
DL251 unit.
DL251B
This device represents module card slots D, E and F of the
DL251 unit.
DL251C
This device represents the redundant AES50 port of the
DL251 unit.
N/A
DL351
Modular I/O
DL351A
This device represents module card slots A, B and C of the
DL351 unit.
DL351B
This device represents module card slots D, E and F of the
DL351 unit.
DL351C
This device represents module card slots G and H of the
DL351 unit.
Dl351D
This device represents the redundant AES50 port of the
DL351 unit.
N/A
DL431 Mic
Splitter
Mic Splitter
For more information on this unit, refer to its operator
manual (part number DOC02-DL431).
MS Cable Red
This device type is used to specify which port is to be used
as a dual redundant port to a DL431 Mic Splitter.
N/A
DL451
Modular I/O
Line IO
For more information on this unit, refer to its operator
manual (part number DOC02-DL451).
Line Io Cable Red
This device type is used to specify which port is to be used
as a dual redundant port to a DL451 Modular I/O.
N/A