Manual

49 PRO X User Manual
Tab name Section Description Example
CM1 From
The CM1 tab allows routing from the optional
bi-directional Neutron-NB expansion card.
The audio format is determined by the installed cards.
You can choose from USB, Dante, AES50 or MADI. Each card
can work at either 96 or 48 kHz. At 48 kHz you can have
48 channels over USB/AES50 and 64 over Dante/MADI.
These numbers are halved if the card sample rate is set to
96 kHz, i.e. 24 bi-directional channels over USB/AES50 and
32 over Dante/MADI.
Stage I/O To
Although this is the equivalent of the Stage I/O tab in the
From section, this one does not contain any mic splitters,
as they don’t supply any inputs to the PRO Series
Control Centre. Refer to “To access the Patching screen”
in chapter 8 and “System components” in chapter 2.
FOH I/O To
This tab is the equivalent of the FOH I/O tab in the
From section.
For information on what devices can be tted in the
I/O rack, see “About the devices on the stage and FOH I/O
tabs” in chapter 8.
Inputs To
The Inputs tab allows sources to be routed to the input
channels, tape returns and aux returns. This tab controls
all of the input channels and the eight Aux Returns
(returns).