Manual

47 PRO X User Manual
About the tabs in the From and To sections
Each tab in the From and To sections of the Patching screen contains graphical representations of the PRO X source and destination patch connectors, respectively.
For details of where you can access the tab sheets in the From and To sections from, see “Navigating to the Patching screen” in chapter 8.
Table 4: Patching screen tabs
Tab name Section Description Example
Stage I/O From
The Stage I/O tab (see Figure 14, “Typical AES50 Device
Conguration window,” in chapter 8) contains the devices
tted in the Stage rack (see “System components” in
chapter 2). For information on what devices can be tted in
the I/O rack, see “About the devices on the stage and FOH
I/O tabs” in chapter 8.
FOH I/O From
The FOH I/O tab contains the devices tted in the FOH rack
(see “System components” in chapter 2). For information
on what devices can be tted in the I/O rack, see “About
the devices on the stage and FOH I/O tabs” in chapter 8.
Busses From
The Busses tab allows routing from the auxes, matrices
and master outputs.
Dir. Out
(Direct Out)
From
The Dir. Out (Direct Out) tab lets you patch any of the
input channels internally (for example, to an eect) or
provides a way out of the PRO Series Control Centre via a
line I/O unit.