Manual

40 PRO X User Manual
Navigating the mix buses
The input channels each have aux and matrix mix buses.
Figure 11: Mix bus navigational controls
Item Element(s) Description
1 Quick access button — input fast strip
This button in the mix section of the input fast strips quickly selects the local mix area of
the selected channel. Illuminates (blue) when active.
2 Quick access button — mix section
This button in the mix section of the mix and master bays quickly selects the bank of
the currently selected aux/matrix bus, assigning it to the local channel strip on the
control surface, and also assigning the bus processing area to the local GUI channel strip.
Illuminates (blue) when active.
3 scroll by 8 buttons
These up and down scroll buttons scroll through the mix buses in groups of eight
(one bank) at a time.
4 scroll by 1 buttons
These up and down scroll buttons scroll through the mix buses one at a time. Mix bus
selection follows the scrolling.
5 Display Shows the number of the currently selected mix bus and its type.
6 FLIP, FX, GEQ, MCA buttons Enable streamlined control of channels and buses (see full explanations below).
7 scroll by 24 buttons Scroll through outputs in groups of 24.