Manual

392 PRO X User Manual
Inputs (input channels)
This section shows you which parameters for each of the input channels are aected by copy through scenes.
Cong sections
The following diagram shows the input channel conguration processing area parameters copied through scenes.
6
5
1
1
9
7
8
2
11
10
1/5
3
4
5
3
1
2
input channel
overview in GUI
channel strip
Conguration processing
area in GUI channel strip
and GUI input fast strip
8
10
9
9
Item Control Parameter
1 gain trim control Digital trim level
knob
2 ø switch Phase on/o switch
3 Control knob Direct output level
4 MODE switch Direct output tap-o point: °∞Post-fade and mute°±,
°∞Pre-mute, pre-processing°± and °∞Pre-mute, post-
processing°±
5 stage box control Remote amplier level
knob*
6 30 Hz switch* 30Hz lter on/o
7 delay control knob Delay time
8 C/O switch Order of processing: Dyn.→Ins.→EQ or EQ→Ins.→Dyn.
9 48 V switch* 48 V phantom voltage on/o
10 MUTE switch Direct output mute on/o
11 B switch Direct output solo B on/o
*Applies to primary and tape inputs.