Manual

336 PRO X User Manual
Appendix N: Parameters Aected By Copy And Paste
This appendix shows the input and output channel parameters aected by copy and paste operations, which are selected via the copy and paste buttons on the GUI
(see “Using copy and paste” in chapter 9).
The structure of this appendix is intended to follow the way that copy and paste operates, that is, by channel or processing area.
Inputs
This section shows you which input channel parameters are aected by copy andpaste.
Conguration
The following diagram shows the parameters of the input conguration section aected by copy and paste.
9
8
1
1
9
7
6
2
4
10
1/8
3
5
8
3
1
2
input channel
overview in GUI
channel strip
Conguration processing
area in GUI channel strip
and GUI input fast strip
6
Item Control Parameter
1 gain trim control knob Digital trim
2 Ø switch Phase invert on/o switch
3 Control knob Direct output level
4 B switch Direct output solo B on/o
5 Pushbutton
Direct output tap-o point: “Post-fade and mute”,
“Pre-mute, pre-processing” and
“Pre-mute, post-processing”
6 C/O switch
Order of processing: Dyn.→Ins.→EQ or
EQ→Ins.→Dyn.
7 delay control knob Delay time
8 stage box control knob Gain of remote amplier
9 30 Hz lter switch 30 Hz lter in/out
10 LINK OPT. pushbutton Stereo linking options