Manual

244 PRO X User Manual
Error Message System(s) Problem Solution
bad le version File and Automation
The preferences, preset library or show
le could not be opened because its le
header version eld was not valid.
Try again. If still unsuccessful, and if the le is a show le,
try a backup le, if one is available.
bad path File and Automation A le or directory is missing.
This is an indication of a serious error. Contact MIDAS
Technical Support.
bad point scene ID File and Automation
The scene’s point scene ID cannot be
found.
Try again.
c
c-lib le error File and Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
c-lib error File and Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
c-lib process error File and Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
d
device utilisation
policy violation
File and Automation The device is full.
If necessary, backup some les and delete them from the
device to free up some memory.
e
empty point File and An attempt was made to Try again. If unsuccessful,
scene index Automation navigate an empty point scene index.
and if the le is a show le, try a backup le, if one is
available.
event is already active Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
f
failed to add to lock
list
File
A device or le could not be ‘locked’ to
prevent another task accessing it while
it is in use.
Although, in practice, it is highly unlikely to occur, this
error may indicate a serious system failure. Contact MIDAS
Technical Support.
failed to add scene File and Automation The scene could not be added. Try again.
failed to allocate
memory
Automation
The MC was unable to allocate sucient
memory (RAM) to complete the task.
Switch o the PRO X Control Centre and switch it back on
again. If the problem persists, it could be an indication of a
serious error. Contact MIDAS Technical Support.
failed to congure
scope mask
Automation
The ‘copy and paste through scenes’
operation failed.
Try again. If repeated attempts fail, contact MIDAS
Technical Support.
failed to create show Automation A new show could not be created.
Try again. If repeated attempts fail, contact MIDAS
Technical Support.
failed to deschedule
event
Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
failed to schedule
event
Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
i
immutable scene
(cannot delete ‘safe’
or ‘current’ scene)
File and Automation
The operation on the current or safe
scene is not allowed. The safe scene
cannot be edited or deleted and you
cannot store to it. Also, you cannot
delete the scene last recalled to the
control surface. (Precludes the use of the
Now button.)
Avoid using these types of operation.
j
jog position is empty Automation The current scene is empty. Avoid this type of operation on an empty scene.
m
missing le File and Automation The required le cannot be found. Try again.
missing navigation
state
Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.
mtools lookup File and Automation Critical internal error.
This is an indication of a serious error. Contact MIDAS
Technical Support.